Projected Capacitive Touch Screen Bar TFT LCD Display 5.2″

Model No. WF52QTLBSDBG0

Size : 5.2”
Resolution : 480 x 128 dots
View Direction : 6H
Interface : 8080, MPU
Controller IC : SSD1963
Control-Board : Yes
Brightness (cd/m²): 400
Frame Through Hole : Yes
Touch Screen : PCAP, Projected Capacitive Touch Screen
Detect Point : 5 Fingers

Description

WF52QTLBSDBG0 is a 5.2-inch bar-type TFT touch display. The module features a Projected Capacitive Touch Panel (PCAP) supporting 5-point detection. It has a resolution of 480×128 dots and a high brightness of 400 cd/m2. The module dimension is 180.0 × 65.0 × 11.8 mm with an active area of 127.152 × 33.9072 mm. The display features a glare surface, 6 o’clock view direction, and 12 o’clock gray scale inversion direction.

WF52QTLBSDBG0 is built-in with SSD1963 driver IC, supporting 8080 MPU interfaces. The supply voltage for LCM (VDD) is from 3.0V to 3.3V (typical value: 3.1V). This bar TFT can operate at a temperature range from -20℃ to +70℃, and its storage temperatures are from -30℃ to +80℃.

Drawing

Interface

LCM PIN Definition (CON4)

Pin	Symbol	Function
1	GND	System round pin of the IC. Connect to system ground.
2	VDD	Power Supply : +3.3V
3	BL_E	Backlight control signal , H: On L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7~14	DB0~DB7	Data bus
15~22	DB8~DB15	Data bus (When select 8bits mode, this pin is NC)
23	NC	No connect
24	CTP_INT	CTP_ External interrupt to the host
25	CS	Chip select
26	RESET	Hardware reset
27	LR	Right /Left selection; Default R/L is Pull High
28	UD	Up/down selection; Default U/D is Pull High
29	CTP_SCL	CTP_SPI Slave mode, chip select, active low / I2C clock input
30	CTP_SDA	CTP_ SPI Slave mode, data input / I2C data input and output
31	CTP_RST	CTP_ External Reset, Low is active
32	NC	No connect
33	VLED-	VLED- for B/L LED inverter (GND)
34	VLED-	VLED- for B/L LED inverter (GND)
35	VLED+	VLED+ for B/L LED inverter (+5V)
36	VLED+	VLED+ for B/L LED inverter (+5V)

General Specifications

Item	Dimension	Unit
Size	5.2	inch
Dot Matrix	480 × RGB × 128	dots
Module dimension	180.0 × 65.0 × 11.8	mm
Active area	127.152 × 33.9072	mm
Dot pitch	0.0883 × 0.2649	mm
LCD type	TFT, Normally White, Transmissive
View Direction	6 o’clock
Gray Scale Inversion Direction	12 o’clock
Aspect Ratio	Bar Type
Backlight Type	LED,Normally White
Driver IC	SSD1963
Interface	Digital 8080 family MPU 8bit/16bit
With /Without TP	PCAP, Projected capacitive touch panel
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	－	3.0	3.1	3.3	V
Supply Current For LCM	IDD	－	－	200	－	mA

Search keyword: tft 5.2, tft 5.2″, 5.2 tft lcd, 5.2″ tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2″ tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2″,bar type tft