Wide Temperature 10.4″ LVDS TFT LCD Display with PCAP

Model No. WF104GTWAMLNB0

Size : 10.4”
Resolution : 1024 x 768 dots
View Direction : IPS (80/80/80/80 min)
Interface : LVDS
Driver IC: —
Control-Board : No
Brightness (cd/m²): 400
Frame Through Hole : No
Touch Screen : Projected capacitive touch screen (PCAP)
Detect Point : 2 Fingers
Operating Temperature : -30~+80 °C (Wide Temperature)

Categories: TFT LCD, Wide Temperature TFT

Description

WF104GTWAMLNB0 is a 10.4-inch Wide Temperature IPS TFT-LCD module with a Projected Capacitive Touch Panel. It has a resolution of 1024×768 pixels and supports an LVDS interface. WF104GTWAMLNB0 adopts an IPS panel, offering wider viewing angles of Left: 80° / Right: 80° / Up: 80° / Down: 80° (minimum), a contrast ratio of 1000:1 (typical), and a brightness of 400 nits (typical), with a glare surface panel and an aspect ratio of 4:3.

For customers requiring a High Brightness version, please choose WF104GSWAMLNB0.

The supply voltage (VDD) for WF104GTWAMLNB0 ranges from 3.0V to 3.6V, with a typical value of 3.3V. It can operate at temperatures ranging from -30°C to +80°C and can be stored within the same temperature range.

Customers who do not require a touch panel option can choose either module WF104GTWAMLNN0 or WF104GSWAMLNN0 (High Brightness version). As Mitsubishi has announced the cessation of TFT-LCD module manufacturing, customers can consider our WF104G series as a replacement for Mitsubishi’s 10.4-inch displays.

Assembly Instructions: Please note that assembly requires the use of edge-measuring keyholes for fixing and support. Ensure proper alignment during installation to avoid misplacement.

Drawing

SPECIFICATIONS

Interface

1.LCM PIN Definition (CON1)

Pin	Symbol	Function
1-2	VDD	Power supply: + 3.3V
3-4	GND	Ground
5	Link0-	0- LVDS differential data input
6	Link0+	0+ LVDS differential data input
7	GND	Ground
8	Link1-	1- LVDS differential data input
9	Link1+	1+ LVDS differential data input
10	GND	Ground
11	Link2-	2- LVDS differential data input
12	Link2+	2+ LVDS differential data input
13	GND	Ground
14	CLKIN-	– LVDS differential clock input
15	CLKIN+	+ LVDS differential clock input
16	GND	Ground
17	Link3-	3- LVDS differential data input
18	Link3+	3+ LVDS differential data input
19	MODE	LVDS 6/8 bit select function control, Low or NC →6bit Input Mode; High →8bit Input Mode
20	SC	Scan direction selector (Low: Normal ;High: Reverse)

2.CON2

Pin	Symbol	Function
1-2	VLED 12V	12V input
3-4	GND	Ground
5	BLEN	Backlight ON-OFF
6	LED PWM	Light Dimming Control (PWM) Input Voltage (Low active)

3. CON3

Pin	Symbol	Function
1-3	NC	No connection
4	Vss	Power ground.
5-8	NC	No connection
9	RESET	RST
10	USB_D-	D-
11	USB_D+	D+
12	USB_VDD 5V	Power supply

General Specifications

Item	Dimension	Unit
Size	10.4	inch
Dot Matrix	1024 × RGB × 768 (TFT)	dots
Module dimension	240.6 × 190.8 × 15.65	mm
Active area	210.432 × 157.824	mm
Pixel Pitch	0.2055 × 0.2055	mm
LCD type	TFT, Normally Black, Transmissive
Viewing Angle	80/80/80/80 min
Aspect Ratio	4:3
TFT Interface	LVDS
Backlight Type	LED, Normally White
PCAP IC	ILI2511 or Equivalent
PCAP Interface	USB
PCAP FW Version	0x06.0x00.0x00.0x00.0x00.0x00.0x00.0x00
PCAP Resolution	16384*16384
Touch Panel	Projected capacitive touch screen (PCAP)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-30	－	+80	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Operating conditions

Item	Symbol	Standard Value			Unit
Item	Symbol	Min	Typ	Max	Unit
Power voltage	VDD	3	3.3	3.6	V
Supply PCAP	USB_VDD 5V	4.4	5	5.5	V
Supply PCAP	I VDD 5V	—	95	145	mA
Input logic high voltage	VIH	0.7 VDD	–	VDD	V
Input logic low voltage	VIL	0	–	0.3 VDD	V
Current for Power	IVDD	–	385	424	mA