Smart Display 7 inch CAN Bus TFT with Projected Capacitive Touch (CANopen)

Model No. WL0F0007000A8GAAASA00

  • TFT Size: 7″
  • TFT Resolution: 1024×600 dots
  • TFT View Direction: 85/85/85/85 (IPS)
  • Communication Interface: CAN bus
  • Protocol: CANopen
  • TFT Touch Screen: Capacitive Touch Panel
  • Brightness(cd/m²): 450
Categories: ,

Description

WL0F0007000A8GAAASA00 is a 7″ Smart Display_CAN series TFT which is defined as a slave device, that is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. WL0F0007000A8GAAASA00 is integrated with a standard TFT module WF70A8TYAHLNG0 and 4-layers PCBA with built-in firmware. This 7″ Smart Display _CAN series TFT is an easy-to-use product which allows customers to develop projects rapidly in cost-effective way. This 7” Smart Display can use computer with USB2CAN dongle or Raspberry Pi interface (PiCAN2) as HOST platform.

Smart Display products are designed with STMicroelectronics’ (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.

  • TouchGFX: An advanced free-of-charge graphic software framework optimized for STM32 microcontrollers.
  • STM32CubeIDE: An advanced C/C++ development platform with peripheral configuration, code generation, code compilation, and debug features for STM32 microcontrollers and microprocessors.
  • STM32CubeMX: A graphical tool that allows a very easy configuration of STM32 microcontrollers, as well as the generation of the corresponding initialization C code for the Arm® Cortex®-M core or a partial Linux® Device Tree for Arm® Cortex®-A core, through a step-by-step process.
  • STM32CubeProg: An all-in-one multi-OS software tool for programming STM32 products. It provides an easy-to-use and efficient environment for reading, writing and verifying device memory through both the debug interface (JTAG and SWD) and the bootloader interface (UART, USB DFU, I2C, SPI, and CAN).

 

We’ve also pushed the sample code on Github for your ST platform design reference: ► Link to Github

Below are the features of 7″ smart display:

  • +12V power supply input with 5V to 16V dynamic range power input, the power consumption is around 6 Watt.
  • Power-On Self-Test & Splash screen.
  • CAN bus Interface.
  • Supports CANopen protocol, default baud rate at 250KB.
  • Built in flash memory, storing the font and Object Dictionary Data.
  • Supports projected capacitive touch screen (PCAP).
  • Embedded buzzer controlled by Master Device.
  • HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
  • Design the UI without writing a line of code by WINSTAR GUI builder! (►Link to GUI Builder Introduction)
  • Designed with STM32F series MCU and Support STMicroelectronics’ (ST) software development tools.

 

Try before you buy! Contact us to download WINSTAR GUI Builder application.

We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.
We also provide demo set with all needed accessories for you to realize your GUI design on displays.

Drawing

Drawing

Smart Display 7 inch CAN Bus TFT with Projected Capacitive Touch (CANopen), CAN Open Display - WL0F0007000A8GAAASA00

Bom

Item Description
LCM WF70A8TYAHLNG0#
PCBA Design part for SMART070

SPECIFICATIONS

SPECIFICATIONS

General Specifications

General information

Item Standard Value Unit
Operating voltage 5~16V Vdc
 Communication Interface  CAN bus differential ± 3.3 N/A
 MCU  STM32F746 216MHz N/A
Flash Memory 16 MB
 SDRAM Frequency 108 MHz
LCD display size 7.0 inch
Dot Matrix 1024 x RGB x 600(TFT) dot
Module dimension 184.1(W) x 103.8(H) x 22(D) mm
Active area 154.2144 x 85.92 mm
Dot pitch 0.1506 x 0.1432 mm
Brightness Min:400; Typ:450 cd/m2
LCD type TFT, Normally Black, Transmissive
View Direction 85/85/85/85
Aspect Ratio 16:9
With /Without TP With CTP
Surface Glare

Absolute Maximum Ratings

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electronical Characteristics

Electronical Characteristics

Interface Pin Function

CON2 definition

Pin Symbol Function Remark
1 VIN Power supply V+ Input
2 GND Power supply GND input Input
3 CAN_H CAN bus D+ I/O
4 CAN_L CAN bus D- I/O
5 GND Power supply GND input Input
6 GND Power supply GND input Input
7 NC _ _
8 NC _ _
9 Reserve _ _
10 Reserve UART RX interface(Reserve) Reserve
11 Reserve UART TX interface(Reserve) Reserve
12 GND GND GND
13 Reserve _ _
14 NC _ _
15 NC _ _
16 GND GND GND

CON3 definition

Pin Symbol Function Remark
1 +3V3 3.3V power for JTAG interface Output
2 SWCLK CLK pin for JTAG interface Input
3 GND GND for JTAG interface Output
4 SWDIO Data pin for JTAG interface I/O
5 NRST Reset pin for JTAG interface Input
6 GND GND Output
7~16 NC _ _

Display Usage

Functional description

Smart Display can be used to display the coordinate, status and data information provided by the connected HOST device. Customers can configure the position coordinates they want to display in normal operation mode.

The Display is designed to be easily connected to a controller network, and to operate with minimum setup or knowledge of the SDO configuration on the controllers.

Splash Screen

The default splash image is shown below.

Splash Screen

This product is produced as a generic product. If you require a custom splash image for your application, contact us to discuss.

Default Selection

Press the preferred application and hold for 3 seconds for the first time power on.

Default Selection - WL0F0007000A8GAAASA00

 

Acquisition of Displayed Data

The Smart Display can acquire the data that it displays either using the CANopen SDO protocol, or using the CANopen PDO protocol.

On Pre-operational mode, customers can set the coordinates of objects through SDO; On operational mode, customers can send data of objects through PDO.

Configuring the Display

Winstar Smart Display CAN series offers an out-of-the-box CANopen development experience that will lower customers’ development costs and speed time-to-market expectations.

The Smart Display can use wide-temperature are designed to support control applications in harsh operating conditions, which designed to be connected to a variety of different situation combinations, such as automotive, marine, power generation and oil-and-gas. The Smart Display comes with standard UI objects to get customers project off the ground quickly. If customers need custom UI objects support, our engineers are here to help. Send over your contents in PNG/JPG format, we will send over a new set of UI objects within 3~5 working days.

The Smart Display is defined as a slave device, which is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects.

Example Screen Layout (Industry application)

The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in an industry application situation.

Example Screen Layout (Industry application) - WL0F0007000A8GAAASA00

Example Screen Layout (Vehicle automotive)

The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a vehicle automotive situation.

Example Screen Layout (Vehicle automotive) - WL0F0007000A8GAAASA00

Example Screen Layout (Medical application)

The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a Medical application situation.

Example Screen Layout (Medical application) - WL0F0007000A8GAAASA00

 

Related products

Smart Display 7 inch CAN Bus TFT with Projected Capacitive Touch (CANopen)

Add to cart