5 inch TFT Panel with LCD Controller Board

Model No. WF50FTYFGDBGA

Size : 5 inch
Resolution : 800×480 dots
View Direction : 80/80/80/80
Controller IC：SSD1963
Control-Board : Yes
Brightness(cd/m²): 400
Frame Through Hole : No
Touch Panel : Projected Capacitive Touch Panel (PCAP)
O-Film: No

Categories: TFT LCD, TFT Panel + Controller Board

Description

WF50FTYFGDBGA is a 5-inch TFT LCD with Controller Board. The module is built-in with SSD1963 driver IC, supporting 8080 MPU interfaces. It has a resolution of 800×480 dots and 400 cd/m2 brightness. The module dimension is 120.7 x 75.8 x 8.76 mm with an active area of 108.0 × 64.8 mm. The display features a glare surface with IPS 80/80/80/80 wide viewing angles.

The display has a controller board with 36 pin-out connectors. Pin no. 33 ~ 36 are defined for backlight supply; therefore, customers have no need to design extra backlight circuits. The supply voltage for LCM (VDD) is from 3.1V to 3.6V (typical value: 3.3V). The display can operate at a temperature range from -20℃ to +70 ℃, and its storage temperatures are from -30 to +80 ℃.

Drawing

SPECIFICATIONS

Interface

Pin	Symbol	Function
1	GND	System round pin of the IC. Connect to system ground.
2	VDD	Power Supply : +3.3V
3	BL_E	Backlight control signal , H: On L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7	DB0	Data bus
8	DB1	Data bus
9	DB2	Data bus
10	DB3	Data bus
11	DB4	Data bus
12	DB5	Data bus
13	DB6	Data bus
14	DB7	Data bus
15	DB8	Data bus (When select 8bits mode, this pin is NC)
16	DB9	Data bus (When select 8bits mode, this pin is NC)
17	DB10	Data bus (When select 8bits mode, this pin is NC)
18	DB11	Data bus (When select 8bits mode, this pin is NC)
19	DB12	Data bus (When select 8bits mode, this pin is NC)
20	DB13	Data bus (When select 8bits mode, this pin is NC)
21	DB14	Data bus (When select 8bits mode, this pin is NC)
22	DB15	Data bus (When select 8bits mode, this pin is NC)
23	NC	No connection
24	PCAP_INT	PCAP_ External interrupt to the host
25	CS	Chip select
26	RST	Hardware reset
27	NC	No connection
28	NC	No connection
29	PCAP_SCL	I2C clock input
30	PCAP_SDA	I2C data input and output
31	PCAP_RST	PCAP_ External Reset, Low is active
32	NC	No connection
33	VLED-	VLED- for B/L LED inverter (GND)
34	VLED-	VLED- for B/L LED inverter (GND)
35	VLED+	VLED+ for B/L LED inverter
36	VLED+	VLED+ for B/L LED inverter

General Specifications

Item	Dimension	Unit
Size	5.0	inch
Dot Matrix	800 × 3(RGB) × 480	dots
Module dimension	120.7 x 75.8 x 8.76 (Max)	mm
Active area (AA)	108.0 × 64.8	mm
Pixel pitch	0.135 x 0.135	mm
LCD type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	5:3
Backlight Type	LED, Normally White
Controller IC	SSD1963
TFT Interface	Digital 8080 family MPU 8bit/16bit
PCAP IC	ILI2130 or Equivalent
PCAP Interface	I2C
PCAP FW Version	0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00
PCAP Resolution	16384*16384
Touch Panel	Projected Capacitive Touch Panel (PCAP)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	3.1	3.3	3.6	V
Supply Current For LCM	IDD	–	76	114	mA