4.3 inch IPS 480×272 TFT LCD with Controller Board

Model No. WF43WTYFEDBN0

Size : 4.3 inch
Resolution : 480×272 dots
View Direction : IPS
Interface : MCU
Controller IC：SSD1963
Control-Board : Yes
Brightness (cd/m²): 500
Frame Through Hole: No
Touch Panel : Without Touch Panel

Categories: TFT LCD, TFT Panel + Controller Board

Description

WF43WTYFEDBN0 is a 4.3 inch TFT-LCD display with a controller board. It has a resolution of 480×272 pixels and 500 cd/m2 brightness. This module uses SSD1963 controller IC supporting 8080 MCU 8bit/16bit interfaces. The module dimension of the display is 105.5 x 67.2 mm, and the active area is 95.04 x 53.856 mm. Its supply voltage range for analog is 3.0V to 3.3V; the typical value is 3.1V.

This display module uses an IPS screen, which allows users to see the display clearly at wide angles. The WF43WTYFEDBN0 module can operate at temperatures from -20°C to +70°C; its storage temperatures range from -30°C to +80°C.

Drawing

SPECIFICATIONS

Interface

Pin	Symbol	Function
1	GND	System round pin of the IC. Connect to system ground.
2	VDD	Power Supply : +3.3V
3	BL_E	Backlight control signal , H: On L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7	DB0	Data bus
8	DB1	Data bus
9	DB2	Data bus
10	DB3	Data bus
11	DB4	Data bus
12	DB5	Data bus
13	DB6	Data bus
14	DB7	Data bus
15	DB8	Data bus (When select 8bits mode, this pin is NC)
16	DB9	Data bus (When select 8bits mode, this pin is NC)
17	DB10	Data bus (When select 8bits mode, this pin is NC)
18	DB11	Data bus (When select 8bits mode, this pin is NC)
19	DB12	Data bus (When select 8bits mode, this pin is NC)
20	DB13	Data bus (When select 8bits mode, this pin is NC)
21	DB14	Data bus (When select 8bits mode, this pin is NC)
22	DB15	Data bus (When select 8bits mode, this pin is NC)
23	NC	No connection
24	NC	No connection
25	CS	Chip select
26	RESET	Hardware reset
27	DIP ON	Display control H: On L:Off
28	NC	No connection
29	NC	No connection
30	NC	No connection
31	NC	No connection
32	NC	No connection
33	VLED-	VLED- for B/L LED inverter (GND)
34	VLED-	VLED- for B/L LED inverter (GND)
35	VLED+	VLED+ for B/L LED inverter (+3.3V)
36	VLED+	VLED+ for B/L LED inverter (+3.3V)

General Specifications

Item	Dimension	Unit
Size	4.3	inch
Dot Matrix	480 × RGB × 272(TFT)	dots
Module dimension	105.5 x 67.2 x 6.5	mm
Active Area (AA)	95.04 x 53.856	mm
Dot pitch	0.066 × 0.198	mm
LCD type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Controller IC	SSD1963
Interface	Digital 8080 family MPU 8bit/16bit
Touch Panel	Without Touch Panel
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Operating conditions

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	–	3.0	3.1	3.3	V
Supply Current For LCM	IDD	–	–	50	75	mA

Backlight driving conditions

Parameter	Symbol	Min	Typ	Max	Unit
Operation Current For LED Driver	VLED+s=3.3V	200	–	350	mA
Power Consumption	VLED+=3.3V	660	–	1155	mW
Supply Voltage For LED Driver	VLED+	3.3	–	5	V
LED Life Time		–	50,000	–	Hr