2.4″ SPI TFT LCD Display Module 240×320 ST7789V with RTP

Model No. WF24MTLAJDNT0

Size: 2.4 inch
Resolution : 240×320 dots
View Direction:6H
SPI Interface (SPI TFT Display, SPI LCD, SPI Display)
Driver IC：ST7789V
Control-Board: No
Brightness(cd/m²): 350
Frame Through Hole: No
Touch Screen: Resistive Touch Screen

Categories: Standard TFT Color Display, TFT LCD

Description

WF24MTLAJDNT0 is a 2.4-inch portrait mode SPI TFT-LCD display module with Resistive Touch Screen (RTP); resolution 240×320 pixels. This module is built-in with ST7789V IC; it supports 4-Line SPI interface, supply voltage for analog (Vcc) range from 2.4V to 3.6V, typical value 3.3V. The SPI interface allows for easy communication between the TFT LCD display and the host device, providing a reliable and efficient connection. This module is having anti-glare surface panel, view direction 6 o’clock, gray scale inversion 12 o’clock, contrast ratio 500:1.

WF24MTLAJDNT0 module is a Portrait mode TFT-LCD featured with brightness 350 nits (typical value). And with low power consumption, this display helps to extend battery life, making it an excellent choice for portable devices. The module also is available for without touch screen option part no. WF24MTLAJDNN0. The working temperatures for WF24M model is from -20°C to +70°C; its storage temperatures range from -30°C to +80°C.

Drawing

SPECIFICATIONS

Interface

LCM PIN Definition

Symbol

Function

GND

Ground

VLED+

Anode of LED backlight.

VLED-

Cathode of LED backlight.

GND

Ground

VCC

Power supply

RESET

System reset pin. (RESX)
signal is active low

SDA

When IM3: Low, SPI interface input/output pin.
When IM3: High, SPI interface input pin.
The data is latched on the rising edge of the SCL signal.
If not used, please fix this pin at VDDI or DGND level.

DCX(SCL)

This pin is used to be serial interface clock.
DCX=’1’: display data or parameter.
DCX=’0’: command data.
If not used, please fix this pin at VDDI or DGND.

CSX

Chip selection pin
Low enable.
High disable.

WRX(D/CX)

Display data/command selection pin in 4-line serial interface.
Second Data lane in 2 data lane serial interface.
If not used, please fix this pin at VDDI or DGND.

GND

Ground

SDO(DOUT)

SPI interface output pin.
The data is output on the falling edge of the SCL signal.
If not used, let this pin open.

Tearing effect signal is used to synchronize MCU to frame memory
writing.
If not used, please let this pin open

IM3

The MCU interface mode select.

IM3	IM2	IM1	IM0	MPU Interface Mode	Data pin
0	1	1	0	4-line 8bit serial I/F	SDA: in/out
1	1	1	0	4-line 8bit serial I/F II	SDA: in/SDO: out

GND

Ground

Right electrode

Bottom electrode

Left electrode

Top electrode

GND

Ground

General Specifications

Item	Dimension	Unit
Size	2.4	inch
Dot Matrix	240 × RGB × 320(TFT)	dots
Module dimension	42.72(W) × 60.26(H) × 3.43(D)	mm
Active area	36.72 × 48.96	mm
Dot pitch	0.153 × 0.153	mm
LCD type	TFT, Normally White, Transmissive
Interface	SPI
TFT Driver IC	ST7789V or Equivalent
View Direction	6 o’clock
Gray Scale Inversion Direction	12 o’clock
Aspect Ratio	Portrait
Backlight Type	LED, Normally White
Touch Panel	Resistive Touch Screen
Surface	Anti-Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Analog	Vcc	－	2.4	3.3	3.6	V
Supply Current For LCM	Icc	－	－	6.4	9.6	mA

Search keyword: tft 2.4, tft 2.4″, 2.4 tft lcd, 2.4″ tft lcd, 2.4 inch tft lcd, tft lcd 2.4, 2.4 tft display, 2.4″ tft display, 2.4 inch tft display, tft display 2.4, tft display 2.4″, 240×320 lcd