5″ 800×480 Wide Temperature IPS TFT LCD

Model No. WF50FTWAGLNN0

  • Size : 5 inch
  • Resolution : 800×480 dots
  • View Direction : IPS
  • Interface : LVDS
  • Driver IC：ST7262
  • Control-Board : No
  • Brightness(cd/m²) : 500
  • Frame Through Hole : No
  • Touch Screen : No
  • Operating Temperature : -30~+80°C (Wide Temperature)
Categories: ,

Description

WF50FTWAGLNN0 is a 5 inch IPS landscape mode TFT LCD module, with resolution 800×480 pixels. WF50FTWAGLNN0 module is built in with ST7262 driver IC; this module supports LVDS interface (Default VESA), contrast ratio 1,000:1 (typical value), brightness 500 nits (typical value). If customers require RGB interface, please choose WF50FTWAGDNN0.

This 5″ IPS TFT has a wider viewing angle than TN TFT, the view angle is Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The power voltage of WF50F model is from 3.1 to 3.6V, typical value 3.3V, aspect ratio 5:3, normally black, transmissive LCD type, anti-glare surface glass. It can be operating at temperatures from -30℃ to +80℃ and storage temperatures from -30℃ to +80℃. WF50F have Resistive Touch Panel and Projected Capacitive Touch Panel for optional.

Drawing

Drawing

Specifications

Specifications

Interface

Pin Symbol Function
1 NC No connection
2 VCC Power voltage
3 VCCI Power supply for digital I/O pins.
4 NC No connection
5 GRB Global reset pin. When GRB is “L”, internal initialization procedure is executed
6 DISP Display on/off
7 GND Power Ground
8 RXIN0- LVDS input lane: RX0-/ RX0+
9 RXIN0+
10 GND Power Ground
11 RXIN1- LVDS input lane: RX1-/ RX1+
12 RXIN1+
13 GND Power Ground
14 RXIN2- LVDS input lane: RX2-/ RX2+
15 RXIN2+
16 GND Power Ground
17 RXCLKIN- LVDS input lane, detail pin define please refer to LVDS
Input Pin Mapping Table.
18 RXCLKIN+
19 GND Power Ground
20 RXIN3- LVDS input lane: RX3-/ RX3+
21 RXIN3+
22 GND Power Ground
23-24 NC No connection
25 FMT LVDS_FMT sets LVDS data format.

LVDS_FMT Function Description
L VESA Mode (Default)
H JEIDA Mode

LVDS_FMT is not used in RGB interface and should be connected to “L”.
26-27 NC No connection
28 SELB SELB sets VSYNC polarity in RGB interface and sets LVDS 3- / 4- lane in LVDS interface.

MCU Type VDPOL Function Description
RGB interface L VSYNC polarity: positive
H VSYNC polarity: positive: negative (Default)
LVDS inteface L LVD 3 lane
H LVD 4 lane (Default)
29 NC No connection
30 GND Power Ground
31-32 VLED- Power for LED backlight (Cathode)
33 L/R Horizontal scan direction control pin. This pin must be connected to “H” or “L” according to system application

HDIR Function Description
L From right to left
H From left to right (Default)
34 U/D Vertical scan direction control pin. This pin must be connected to “H” or “L” according to system application.

VDIR Function Description
L From down to up.
H From up to down.(Default)
35 NC No connection
36-37 GND Power Ground
38 NC No connection
39-40 VLED+ Power for LED backlight (Anode)

General Specifications

General Specifications

Item Dimension Unit
Size 5.0 inch
Dot Matrix 800× 3(RGB) × 480 dots
Module dimension 120.7(W) ×75.8(H) ×2.8mm mm
Active area 108(W) ×64.8 (H) mm mm
Dot pitch 0.135(W) ×0.135(H) mm mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 5:3
Driver　IC ST7262 or equivalent
Interface LVDS
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Anti-Glare

 

Absolute Maximum Ratings

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 － +80 ℃
Storage Temperature TST -30 － +80 ℃

Electrical Characteristics

Electrical Characteristics

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VCC 3.1 3.3 3.6 V
Power voltage VCCI 3.1 3.3 3.6 V
Current for Driver(Black) ICC – 67.6 102 mA

Search keyword: tft 5″, 5 tft lcd, 5″ tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5″ tft display, 5 inch tft display, tft display 5, tft display 5″

Related products

5″ 800×480 Wide Temperature IPS TFT LCD

Add to cart