The WF43QTIBEDBGF is a 4.3-inch capacitive touch TFT LCD display with a control board. It boasts a resolution of 480×272 pixels and an aspect ratio of 16:9. Equipped with an SSD1963 controller board, it offers interface options of 8-bit or 16-bit within the 8080 family MPU. Pin numbers 33 to 36 are designated for backlight supply, eliminating the need for an extra backlight circuit. The module features frame through holes for convenient mounting and usage.
The Winstar Q series supports the SSD1963 controller, which utilizes traditional inputs and drives TFT via VESA signals. Consequently, there is no need for a T-COM circuit onboard. Moreover, all functions, including TFT connection, backlight driver, and touch panel, are integrated into a single connection.
The WF43QTIBEDBGF module comes with a projected capacitive touch panel (PCAP) with an ILI2130 driver IC, supporting I2C interfaces and a 5-point touch function. The module’s operating temperature ranges from -20°C to +70°C, and its storage temperature ranges from -30°C to +80°C. The LCM power supply voltage ranges from 3.0V to 3.3V, with a typical value of 3.1V. The brightness of the module is 400 nits, and the contrast ratio is 500:1 (typical value).
The Q series modules provide the following innovative advantages to offer outstanding performance for colorful displays:
- Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
- Q Series modules are available in 8 bit and 16 bit parallel interface options.
- The pin no. 33 ~ 36 already pre-defined as backlight supply.
- Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5″ and 4.3″ also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
- The 5.7″, 7.0″, 8.0″ and 10.2″ Q Series are allowed to design “Sleep Mode” to close BIAS(VGH, VGL, AVDD) low power consumption mode.
- Resistive touch screen options are available for all Q Series displays, and a 4-line signal (X1, Y1, X2, Y2) can be input from the 36-pin connector.
- Projected Capacitive Touch Screen options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.
