3.5″ TFT IPS LCD Display

Model No. WF35UTYAIDNN0

Size : 3.5″
Resolution : 320×480 dots
View Direction : IPS
Interface : MCU 8/16/18-bit, 3-SPI ,RGB interface+3-SPI
Driver IC：ILI9488
Control-Board :No
Brightness(cd/m²) : 600
Frame Through Hole : No
Touch Screen : Without touch panel

Description

WF35UTYAIDNN0 is a 3.5 inch IPS Panel with 320×480 resolution TFT LCD module. This module is built in with ILI9488 IC; it supports MCU, 3-Line SPI interface / RGB interface+3-SPI and featured with brightness 600 nits (typical value).

This 3.5” TFT LCD module is portrait mode with IPS (In-Plane Switching) Panel which having the advantages of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical). WF35UTYAIDNN0 module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

Drawing

Specifications

Interface

LCM PIN Definition

NO	Symbol	Function	I/O
1	LEDK	Cathode of LED backlight	P
2	LEDA	Anode of LED backlight.	P
3	IM0	Note 1	I
4	IM1	Note 1	I
5	IM2	Note 1	I
6	RESET	System reset pin.	I
7	NC(VS)	No Connection (Vrtical Sync signal) Note 2)	I
8	NC(HS)	No Connection (Horizontal Sync signal ; Note 2)	I
9	NC(DCLK)	No Connection (Pixel clock signal; Note 2)	I
10	NC(DE)	No Connection (Data Enable; Note 2)	I
11-16	DB17-12	Data bus (R5~R0; RGB-18bit Pixel; Note 2)	I
17-22	DB11-6	Data bus (G5~G0; RGB-18bit Pixel; Note 2)	I
23-28	DB5-0	Data bus (R5~G0; RGB-18bit Pixel; Note 2)	I
29	NC (SDA)	Connection (serial data input/output pin)	I
30	RD	Read strobe signal. Read out data when RDX is Low.	I
31	WR (SCL)	Write data when WRX is Low.(serial clock input pin)	I
32	D/C	register select	I
33	CS (NCS)	Chip select signal (serial chip select input pin)	I
34	IOVCC	Power supply (TYP:1.8V/2.8V).	P
35	VCI	Power supply(TYP:2.8V).	P
36	GND	Ground	P
37	NC	No connection
38	NC	No connection
39	NC	No connection
40	NC	No connection

Note 1

IM2	IM1	IM0	MPU Interface	GRAM
0	0	0	8080 MCU 18-bit bus	D[17:0]
0	1	0	8080 MCU 16-bit bus	D[15:0]
0	1	1	8080 MCU 8-bit bus	D[7:0]
1	0	1	3-Line SPI	SDA,SCL,NCS
1	0	1	RGB interface+3-SPI	D[17:0] (RGB-18bit/Pixel) D[15:0] (RGB-16bit/Pixel)

General Specifications

Item	Dimension	Unit
Size	3.5	inch
Dot Matrix	320 × RGB × 480(TFT)	dots
Module dimension	54.5 (W) × 83.0 (H) × 2.46(D)	mm
Active area	48.96 × 73.44	mm
LCD type	TFT, Normally Black, Transmissive
View Direction	Wide View
Aspect Ratio	Portrait
Driver IC	ILI9488 Or Equal
Interface	MCU 8/16/18-bit, 3-SPI ,RGB interface+3-SPI
Backlight Type	LED,Normally White
Touch Panel	Without Touch Panel
Surface	Anti-Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	70	℃
Storage Temperature	TST	-30	－	80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for digital	IOVCC	－	－	1.8/2.8	3.3	V
Supply Voltage for analog	VCI	－	－	2.8	3.3	V
Power Supply for Current	ICC	IOVCC=VCI =VCC=3.3V	－	13.6	－	mA

Search keyword: tft 3.5, tft 3.5″, 3.5 tft lcd, 3.5″ tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5″ tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5″