3.5 inch Portrait 320×480 MIPI IPS TFT LCD Module with PCAP

Model No. WF35UTYAIMNG0

Size : 3.5″
Resolution : 320×480 dots
View Direction : IPS
Interface : 1-Lane MIPI
IC : ILI9488
Control-Board :No
Brightness(cd/m²) : 500
Frame Through Hole : No
Touch Screen : Projected capacitive touch panel (PCAP)
Detect Point : 5 Fingers

Description

WF35UTYAIMNG0 is a 3.5 inch IPS TFT LCD module made of resolution 320×480 pixels. This module is built-in with ILI9488 IC; it supports MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface) interface and features a brightness of 500 nits (typical value) and contrast ratio of 700:1 (typical value). WF35UTYAIMNG0 has a Projected Capacitive Touch Panel (PCAP) on the module, which is built-in with GT911 IC on the touchscreen, supports I2C interface, and the power supply for the analog circuit range from 2.8V to 3.3V. If customers don’t require touch panel, you can choose our WF35UTYAIMNN0 module.

This 3.5″ TFT LCD module is portrait mode with IPS (In-Plane Switching) Panel which has the advantage of a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical). WF35UTYAIMNG0 module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

Drawing

Specifications

Interface

LCM PIN Definition

NO	Symbol	Function	I/O
1	VCI	A supply voltage to the analog circuit. Connect to an external power supply of 2.5 ~ 3.3V. Connect to a stabilizing capacitor between VCI and GND.	P
2	IOVCC	A supply voltage to the digital circuit. Connect to an external power supply of 1.65 ~ 3.3V.	P
3	RESET	Reset input signal Initialize the chip with a low input. Be sure to execute a power-on reset after supplying power.	I
4	GND	Ground	I
5	MIPI_CLK_P	Positive polarity of low voltage differential clock signal Leave the pin open when not in use.	I
6	MIPI_CLK_N	Negative polarity of low voltage differential clock signal Leave the pin open when not in use	I
7	GND	Ground	I
8	MIPI_DATA_P	Positive polarity of low voltage differential data signal Leave the pin open when not in use.	I
9	MIPI_DATA_N	Negative polarity of low voltage differential data signal Leave the pin open when not in use.	I
10	GND	Ground	I
11	VLED+	Anode of LED backlight.
12	VLED-	Cathode of LED backlight

PCAP PIN Definition

Pin	Symbol	Function
1	VSS	Connect to system ground.
2	VDDT	Power Supply
3	SCL	I2C clock input
4	NC	No connect
5	SDA	I2C data input and output
6	NC	No connect
7	RST	External Reset, Low is active
8	NC	No connect
9	INT	External interrupt to the host
10	VSS	Connect to system ground.

General Specifications

Item	Dimension	Unit
Size	3.5	inch
Dot Matrix	320 × RGB × 480(TFT)	dots
Module dimension	68.7 (W) × 95.6 (H) × 4.61(D)	mm
Active area	48.96 × 73.44	mm
Pixel pitch	0.153 × 0.153	mm
LCD type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	Portrait
Driver IC	ILI9488 Or Equal
Interface	1-Lane MIPI
Backlight Type	LED, Normally White
PCAP Driver IC	GT911 or equivalent
PCAP Interface	I2C
FW Version	0x95
PCAP Resolution	320*480
Touch Panel	Projected capacitive touch screen (PCAP)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	70	℃
Storage Temperature	TST	-30	－	80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for digital	IOVCC	－	－	1.8/2.8	3.3	V
Supply Voltage for analog	VCI	－	－	2.8	3.3	V
Power Supply for Current	ICC	IOVCC=VCI =VCC=3.3V	－	13.6	－	mA

Search keyword: tft 3.5, tft 3.5″, 3.5 tft lcd, 3.5″ tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5″ tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5″