10.1 inch High Brightness IPS TFT Display with PCAP

Model No. WF101JSYJHLNB0

Size : 10.1 inch
Resolution : 1024×600 dots
View Direction : IPS
Interface : LVDS
Driver IC : EK79001HN + EK73215BCGA
Control-Board : YES
Brightness(cd/m2) : 900
Frame Through Hole : No
Touch Screen : Projected Capacitive Touch Panel (PCAP)
Detect Point : 5 Fingers

Categories: TFT LCD, TFT Panel + Controller Board

Description

WF101JSYJHLNB0 is a 10.1-inch IPS TFT-LCD module with Projected Capacitive Touchscreen (PCAP). This TFT-LCD module, built-in with EK79001HN and EK73215BCGA ICs, supports LVDS interface with resolution of 1024 x 600 pixels. WF101JSYJHLNB0 is featured with an IPS panel that has the advantage of wider view angle of Left:85 / Right:85 / Up:85 / Down:85 degrees; with high brightness of 900 nits (typical value), contrast ratio: 800:1, glare surface panel, the aspect ratio of 16:9.

This model featured a projected capacitive touch panel (PCAP), which is built-in with ILI2511 IC and supports USB interface (I2C available). WF101JSYJHLNB0 module can operate at temperatures from -20℃ to+ 70℃ and storage temperatures from -30℃ to +80℃.

Drawing

SPECIFICATIONS

Interface

TFT LCD Module

Pin No.	Symbol	Description
1-3	DC12V	Digital power
4	NC	No connection
5-8	GND	Digital ground
8	Rxin0-	Negative LVDS differential data inputs
9	Rxin0+	Positive LVDS differential data inputs
10	GND	Digital ground
11	Rxin1-	Negative LVDS differential data inputs
12	Rxin1+	Positive LVDS differential data inputs
13	GND	Digital ground
14	Rxin2-	Negative LVDS differential data inputs
15	Rxin2+	Positive LVDS differential data inputs
16	GND	Digital ground
17	RxCLK-	Negative LVDS differential clock inputs
18	RxCLK+	Positive LVDS differential clock inputs
19	GND	Digital ground
20	Rxin3-	Negative LVDS differential data inputs
21	Rxin3+	Positive LVDS differential data inputs
22	GND	Digital ground
23	LED_PWM	Backlight control signal
24	USB_DC5V	Power supply for PCAP (USB type)
25	DC3V	Power supply for PCAP (I2C Type)
26	USB_D+	Data + (PCAP)
27	GND	Digital ground
28	SDA	I2C data input and output (PCAP)
29	SCL	I2C clock input (PCAP)
30	INT	External interrupt to the host (PCAP)
31	RST	External Reset, Low is active (PCAP)
32	GND	Digital ground
33	USB_D-	Data – (PCAP)
34-43	NC	No connection
44-46	GND	Digital ground
47	NC	No connection
48-50	DC12V	Digital power

General Specifications

Item	Dimension	Unit
Size	10.1	inch
Dot Matrix	1024 RGB x 600	dots
Module dimension	235(W) x 143(H) x 22.43(D)	mm
Active area	222.72 (H) x 125.28(V)	mm
Pixel pitch	0.2175(W) x 0.2088(H)	mm
LCD type	TFT, Normally Black, Transmissive
Interface	LVDS
Driver IC	EK79001HN + EK73215BCGA or Equivalent
Viewing Angle	85/85/85/85
Aspect Ratio	16:9
Backlight Type	LED, Normally White
PCAP IC	ILI2511 or Equivalent
PCAP Interface	USB (I2C available)
PCAP FW Version	V6.0.0.0.62.90.1.2
Touch Panel	Projected Capacitive Touch Screen, PCAP
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

1.Typical Operation Conditions (At Ta = 25 °C)

Item	Symbol	Min.	Typ.	Max.	Unit
Supply Voltage For LCM +12V	DC12V	–	12.0	–	V
Supply Current For LCM +12V	IDC12V	–	650	980	mA
Supply Voltage For PCAP(I2C)	DC3V	3.15	3.3	3.45	V
Supply Current For PCAP (I2C)	IDC3V	–	80	120	mA
Supply PCAP	USB_DC 5V	4.75	5.0	5.25	V
Supply PCAP	IUSB_DC 5V	–	100	100	mA

2. Backlight Driving Conditions

Parameter	Symbol	Min	Typ	Max	Unit
PWM Control Level (LED_PWM)	High Level	–	3.3	–	V
PWM Control Level (LED_PWM)	Low Level	–	0	–	V
PWM Control Duty Ratio	–	1	–	100	%
PWM Control Frequency	–	–	10K	–	Hz
LED Life Time	–	50,000	–	–	Hr