10.1″ 1024×600 High Brightness MIPI IPS TFT Display

Model No. WF101JSYAHMNN0

Size : 10.1 inch
Resolution : 1024×600 dots
View Direction : IPS
Interface : 4-Lanes MIPI
Driver IC : EK79007AD3 + EK73217BCGA
Control-Board : No
Brightness(cd/m2) : 1100
Frame Through Hole : No
Touch Screen : No

Categories: High Brightness TFT Display, TFT LCD

Description

WF101JSYAHMNN0 is a 10.1-inch TFT LCD with IPS wide viewing angles. It has 1024×600 dots resolution and 1100 cd/m2 high brightness. The module is built-in with EK79007AD3 + EK73217BCGA driver IC, supporting 4-Lanes MIPI interfaces.

The module’s Digital Power Supply Voltage For LCD (VDD) is from 1.71V to 1.89V, with a typical value of 1.8V. It features a glare surface and a 16:9 aspect ratio. This TFT can operate at temperatures from -20 ℃ to +70 ℃, and its storage temperatures are from -30 ℃ to +80 ℃.

Drawing

Interface

TFT LCD Module

Pin No.	Symbol	Description
1	VLED+	LED Anode
2	VLED+	LED Anode
3	VGH	Positive power for TFT
4	VGL	Negative power for TFT
5	UPDN	Gate up or down scan control. UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default) UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6	SHLR	Source right or left sequence control. SHLR = ”L“, shift left: last data = S1←S2←S3……….←S1536 = first data. SHLR = ”H“, shift right: first data = S1→S2→S3……..→S1536 = last data.(default)
7	VLED-	LED Cathode
8	VLED-	LED Cathode
9	AVDD	Analog power
10	GND	Digital ground
11	D3P	MIPI data input.
12	D3N	MIPI data input.
13	GND	Digital ground
14	D2P	MIPI data input.
15	D2N	MIPI data input.
16	GND	Digital ground
17	CLKP	MIPI clock input
18	CLKN	MIPI clock input
19	GND	Digital ground
20	D1P	MIPI data input.
21	D1N	MIPI data input.
22	GND	Digital ground
23	D0P	MIPI data input.
24	D0N	MIPI data input.
25	GND	Digital ground
26	STBYB	Standby mode. STBYB = ”H“,normal operation(default) STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27	RESET	Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28	VDD (1.8V)	Digital power
29	VDD (1.8V)	Digital power
30	VCOMI	Common voltage

General Specifications

Item	Dimension	Unit
Size	10.1	inch
Dot Matrix	1024 RGB x 600	dots
Module dimension	235(W) x 143(H) x 5.05(D)	mm
Active area	222.72 (H) x 125.28(V)	mm
Dot pitch	0.2175(W) x 0.2088(H)	mm
LCD type	TFT, Normally Black, Transmissive
Interface	4-Lanes MIPI
Driver IC	EK79007AD3 + EK73217BCGA or equivalent
Viewing Angle	85/85/85/85
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Touch Panel	Without Touch Panel
Surface	Anti-Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Typical Operation Conditions (At Ta = 25 °C,)

Item	Symbol	Min	Typ	Max	Unit
Digital Power Supply Voltage For LCD	VDD	1.71	1.8	1.89	V
Analog Power Supply Voltage	AVDD	9.89	10.2	10.5	V
Gate On Power Supply Voltage	VGH	19.4	20	20.6	V
Gate Off Power Supply Voltage	VGL	-10.3	-10	-9.7	V
Common Power Supply Voltage	VCOMI	4	4.3	4.6	V

Search keyword: tft 10.1″, 10.1 tft lcd, 10.1″ tft lcd, 10.1 inch tft lcd, tft lcd 10.1, 10.1 tft display, 10.1″ tft display, 10.1 inch tft display, tft display 10.1″, 10.1 tft lcd