0.96 inch Thin OLED Display, OLED I2C Display

Model No. WEO012864D

Thin OLED Display
0.96″ OLED Display, OLED 0.96″
Suitable for wearable device
Type: Graphic
Structure: COG
128 x 64 Dot Matrix
IC：SSD1306
3V Power supply
1/64 duty
Interface: 6800, 8080, SPI, I2C
Display Color: White / Yellow / Blue
Other FPC options available in below table

Categories: Graphic OLED Display, OLED Module

Description

Winstar 0.96 inch (6800/8080/SPI/I2C) OLED Display

Winstar released a 0.96 inch Thin OLED Display WEO012864D model which is made of 128×64 pixels, diagonal size only 0.96 inch. The electronic characteristics and dimension of the thinner version and existing WEO012864D are the same, the main difference between these two WEO012864D is the module thickness, the new version is 1.26 mm on thickness as to the existing one is 1.65 mm. The new version thin 0.96″ OLED display is also built-in SSD1306 driver IC; it communicates via 6800/8080 8-bit parallel and I2C/SPI interface (0.96″ OLED I2C). Adopting thinner OLED panel is a new trend, for new projects, we recommend customers to choose the thinner WEO012864D for new design projects.WEO012864D module supports internal Charge Pump supply and external VCC supply.

WEO012864D Thinner version 0.96 inch OLED Display without Sponge

If customers would like to adopt the WEO012864D thinner version to replace the existing one, you can choose the below part numbers which we add sponge at the back of the module to make them compatible to the existing ones for your applications. Please contact us, if you require different colors.

WEO012864D Thinner version 0.96 inch OLED Display with Sponge

Left: Thinner version without sponge
Right: Thinner version with sponge

Drawing

0.96 inch OLED display, 0.96 OLED display - WEO012864D-Hotbar (Thinner version without sponge)

Data source ref: WEO012864DWPP3N00006

OLED 0.96, 0.96 OLED I2C display,thin OLED display - WEO012864D-Hotbar (Thinner Version with Sponge)

Data source ref: WEO012864DWPP3N00007

SPECIFICATIONS

Interface Pin Function

No.	Symbol	Function
1	N.C. (GND)	Reserved Pin (Supporting Pin) The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.
2	C2N	Positive Terminal of the Flying Inverting Capacitor Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used.
3	C2P
4	C1P
5	C1N
6	VBAT	Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
7	NC	NC
8	VSS	Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground.
9	VDD	Power Supply for Logic This is a voltage supply pin. It must be connected to external source.
10	BS0	Communicating Protocol Select These pins are MCU interface selection input. See the following table:
11	BS1
12	BS2
13	CS#	Chip Select This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low.
14	RES#	Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed.
15	D/C#	Data/Command Control This pin is Data/Command control pin. When the pin is pulled high, the input at D7~D0 is treated as display data. When the pin is pulled low, the input at D7~D0 will be transferred to the command register. For detail relationship to MCU interface signals, please refer to the Timing Characteristics Diagrams. When the pin is pulled high and serial interface mode is selected, the data at SDIN is treated as data. When it is pulled low, the data at SDIN will be transferred to the command register. In I2C mode, this pin acts as SA0 for slave address selection.
16	R/W#	Read/Write Select or Write This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode. When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
17	E/RD#	Read/Write Enable or Read This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low. When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
18~25	D0~D7	Host Data Input/Output Bus These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I2C mode is selected, D2 & D1 should be tired together and serve as SDAout & SDAin in application and D0 is the serial clock input SCL.
26	IREF	Current Reference for Brightness Adjustment This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 12.5μA.
27	VCOMH	Voltage Output High Level for COM Signal This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS.
28	VCC	Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.
29	VLSS	Ground of Analog Circuit This is an analog ground pin. It should be connected to VSS externally.
30	NC (GND)	Reserved Pin (Supporting Pin) The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.

Mechanical Data

Item	WEO012864D-Hotbar	WEO012864D-Hotbar with Sponge	Unit
Dot Matrix	128 × 64		Dots
Module dimension	26.7 × 19.26 × 1.26	26.7 × 19.26 × 1.61	mm
Active area	21.738 × 10.858		mm
Dot size	0.148 × 0.148		mm
Dot pitch	0.17 × 0.17		mm
Display Mode	Passive Matrix
Display Color	Monochrome
Drive Duty	1/64 Duty
IC	SSD1306
Interface	6800,8080,SPI,I2C
Size	0.96 inch

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Logic	VDD	0	4.0	V
Supply Voltage for Display	VCC	0	15.0	V
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TSTG	-40	+85	°C

Electronical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD	－	2.8	3.0	3.3	V
Supply Voltage for Display	VCC	－	11.5	12.0	12.5	V
Input High Volt.	VIH	－	0.8×VDD	－	VDDIO	V
Input Low Volt.	VIL	－	0	－	0.2×VDD	V
Output High Volt.	VOH	－	0.9×VDD	－	VDDIO	V
Output Low Volt.	VOL	－	0	－	0.1×VDD	V
Operating Current for VCC (50% display ON)	ICC	－	－	16.0	20.0	mA

FPC Options:

FPC Length	PIN	Pitch	ZIF FPC or HOTBAR FPC	Interface	FPC No.	Create Date
22	30	0.7	HOTBAR	6800,8080,SPI,I2C	FPC2070003001XXXXX08	20170808
41.1	30	0.5	ZIF	6800,8080,SPI,I2C	FPC2050003011XXXXX28	20180604
13.1	30	0.5	ZIF	6800,8080,SPI,I2C	FPC2050003011XXXXX34	20200221

Search keyword: 0.96 oled, 0.96 inch oled display, oled 0.96″, 0.96 oled i2c display, thin oled display, 128×64 oled, oled 128×64,