TFT-LCD Display 7-inch high-brightness IPS 1200×1920 MIPI DSI 10:16

Model No. WF70C6SYAB5MNN0

Size : 7-inch (Portrait mode)
Resolution : 1200×1920 dots
View Direction : IPS
Interface : MIPI DSI
Driver IC : HX8279-D01*2 CASCADE
Control-Board : No
Brightness(cd/m²): 1000
Frame Through Hole : No
Touch Screen : No

Description

WF70C6SYAB5MNN0 is a 7-inch high-brightness (brightness: 1000 cd/m²) IPS TFT LCD display with wide viewing angles (left 80/right 80/top 80/bottom 80 degrees), no iron frame screw holes, no control board, and high resolution of 1200×1920 dots. The module dimension is 38.2 x 186.62 mm, with an aspect ratio of 10:16. The color arrangement mode is RGB-STRIPE, and the driver IC is HX8279-D01*2 CASCADE, with MIPI DSI interface.

WF70C6SYAB5MNN0 supports full-color display, providing excellent visual performance, and is widely used as an external monitor for cameras or any compatible external monitor, also suitable for navigation scenarios.The power supply voltage range for this display is 1.7V to 2.0V, with a typical value of 1.8V. The operating temperature range of this module is -20 to +70 °C, with a storage temperature range of -30 to +80°C.

7-inch IPS TFT-LCD Display Module Supports MIPI DSI Interface

Drawing

TFT-LCD Display 7 inch high-brightness IPS 1200x1920 MIPI 10:16 RGB-STRIPE - WF70C6SYAB5MNN0

Data source ref:WF70C6SYAB5MNN0#

Specifications

Interface Pin Function

LCM PIN Definition

Pin	Symbol	Function
1	NC	No connection
2	IOVCC	Power supply for system ,IOVCC=1.8V
3	IOVCC	Power supply for system ,IOVCC=1.8V
4	GND	Ground
5	RESET	Device reset signal
6	NC	No connection
7	GND	Ground
8	D0N	MIPI Negative data signal (-)
9	D0P	MIPI Positive data signal (+)
10	GND	Ground
11	D1N	MIPI Negative data signal (-)
12	D1P	MIPI Positive data signal (+)
13	GND	Ground
14	CLKN	MIPI Negative clock signal (-)
15	CLKP	MIPI Positive clock signal (+)
16	GND	Ground
17	D2N	MIPI Negative data signal (-)
18	D2P	MIPI Positive data signal (+)
19	GND	Ground
20	D3N	MIPI Negative data signal (-)
21	D3P	MIPI Positive data signal (+)
22	GND	Ground
23	NC	No connection
24	NC	No connection
25	GND	Ground
26	NC/TE	Sync signal for touch panel. Float it if not used.
27	PWMO	PWM control signal for LED driver
28	NC/BIST	Enable the Test Image Generation function, if connect to ground. Float it if not used.
29	NC	No connection
30	GND	Ground
31	VLED-	LED cathode
32	VLED-	LED cathode
33	NC	No connection
34	VSN	Analog supply negative voltage
35	VSN	Analog supply negative voltage
36	NC	No connection
37	VSP	Analog supply positive voltage
38	VSP	Analog supply positive voltage
39	VLED+	LED anode
40	VLED+	LED anode

General Specifications

Item	Dimension	Unit
Size	7.0	inch
Dot Matrix	1200 x RGB x 1920(TFT)	dots
Module dimension	112.1 x 163.75 x 2.5	mm
Active area	94.5 x 151.2	mm
Pixel pitch	0.07875 x 0.07875	mm
LCD type	TFT, Normally Black ,Transmissive
View Angle	80/80/80/80
Aspect Ratio	10:16
Color arrangement	RGB-STRIPE
Driver IC	HX8279-D01*2 Cascade
Interface	MIPI DSI
Backlight Type	LED,Normally White
Touch Panel	Without Touch Panel
Surface	Glare

*Color tone slight changed by temperature and driving voltage.

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Operating conditions

Item		Symbol	Min	Typ	Max	Unit
Power Supply Input Voltage		IOVCC	1.7	1.8	2.0	V
		VSP	4.5	－	6.0	V
		VSN	-6	－	-4.5	V
Current Consumption	Operating	IOVCC	39.4	40.3	41.3	mA
		VSP	16.8	17.2	17.7	mA
		VSN	12.9	13.3	13.7	mA
	Sleep in	IOVCC	1.58	1.59	1.61	mA
		VSP	2.04	2.05	2.06	mA
		VSN	0.045	0.05	0.052	mA

LED Driving Conditions

Parameter	Symbol	Min	Typ	Max	Unit
LED current	－	－	520	－	mA
LED voltage	A	8.1	9.0	9.9	V
LED Life Time	－	－	50K	－	Hr

Search keyword: tft 7, tft 7″, 7 tft lcd, 7″ tft lcd, 7 inch tft lcd, tft lcd 7, 7 tft display, 7″ tft display, 7 inch tft display, tft display 7, tft display 7″