5.7″ PCAP Touch Panel TFT LCD Module

Model No. WF57XTIACDNG0

  • Size : 5.7 inch
  • Resolution : 320 x 240 dots
  • View Direction : 12H
  • Interface : RGB
  • Driver IC：HX8218+HX8615
  • Control-Board : Option
  • Brightness(cd/m²): 700
  • Frame Through Hole : No
  • Touch Screen : Projected Capacitive Touch Panel (PCAP)
  • Detect Point : 5 Fingers
  • O-Film : Option
Categories: ,

Description

The WF57XTIACDNG0 is a 5.7-inch TFT LCD with a projected capacitive touch panel (PCAP). It boasts a resolution of 320 x 240 dots and a brightness of 700 cd/m². The TFT display is powered by the HX8218+HX8615 driver IC, supporting 24-bit RGB interfaces. Its voltage power supply ranges from 3.2V to 3.4V. The module’s dimensions are 126.00(W) × 101.55(H) mm, with an active area of 115.2 × 86.40 mm.

Equipped with a PCAP touch function and ILI2130 driver IC, the WF57XTIACDNG0 supports I2C interfaces and features 5-finger detection. It offers a 12 o’clock viewing direction, 6 o’clock gray scale inversion, and a 4:3 aspect ratio. Operating temperature ranges from -20℃ to +70℃, while storage temperature spans from -30℃ to +80℃.

A 5.7-inch touchscreen display is versatile and used in various sectors: Smart Home Control, Industrial Monitoring, Medical Diagnostics, In-Car Entertainment, Electronic Menus, Smart Handheld Devices, Agriculture Monitoring, Educational Displays, Traffic Signal Control, Mobile Payments.

Drawing

Drawing

SPECIFICATIONS

SPECIFICATIONS

Interface

LCM PIN Definition

Pin No. Symbol I/O Description
1 IF1 I Input data format control
2 IF2 I Input data format control
3 POL O Polarity Signal connect to VCOM driving circuit.
4 RESET I Hardware reset.
5 SPENA I Chip select
6 SPCL I Serial Clock
7 SPDA I/O Serial Data
8 B0 I Blue Data bit (LSB)
9 B1 I Blue Data bit
10 B2 I Blue Data bit
11 B3 I Blue Data bit
12 B4 I Blue Data bit
13 B5 I Blue Data bit
14 B6 I Blue Data bit
15 B7 I Blue Data bit(MSB)
16 G0 I Green Data bit(LSB)
17 G1 I Green Data bit
18 G2 I Green Data bit
19 G3 I Green Data bit
20 G4 I Green Data bit
21 G5 I Green Data bit
22 G6 I Green Data bit
23 G7 I Green Data bit(MSB)
24 R0 I Red Data bit(LSB)
25 R1 I Red Data bit
26 R2 I Red Data bit
27 R3 I Red Data bit
28 R4 I Red Data bit
29 R5 I Red Data bit
30 R6 I Red Data bit
31 R7 I Red Data bit(MSB)
32 Hsync I Horizontal synchronous signal
33 Vsync I Vertical synchronous signal
34 Data CLK I Dot data clock
35 AVDD I 4.5V~5.5V
36 AVDD I 4.5V~5.5V
37 Vcc I 3V~3.6V
38 Vcc I 3V~3.6V
39 NPC O NTSC/PAL mode Auto detection result H:NTSC/L:PAL
40 VGL I Gate off power
41 VGL I Gate off power
42 UD I Up/Down scan setting. H: Reverse scan / L: Normal scan
43 VGH I Gate on power
44 LRC I Shift direction of device internal shift register control.
45 GND I GROUND
46 VCOM I VCOM driving input
47 VCOM I VCOM driving input
48 ENB I Data enable input. Normally pull low.
49 GND I GROUND
50 GND I GROUND

Backlight PIN Definition

Pin No. Symbol I/O Description
1 VLED+ I Red, LED_ Anode
2 VLED- I Black, LED_ Cathode

PCAP PIN Definition

Pin Symbol Function
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.3V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

General Specifications

General Specifications

Item Dimension Unit
Size 5.7 inch
Dot Matrix 320 × RGB × 240 (TFT) dots
Module dimension 126.00(W) × 101.55(H) ×7.79(D) mm
Active area 115.2 × 86.40 mm
Dot pitch 0.12 × 0.36 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
TFT Drive IC HX8218+HX8615 or Equivalent
Interface 24-bit RGB
Aspect Ratio 4:3
Backlight Type LED, Normally White
PCAP FW Version 0x07.0x00.0x00.0x00.0xA1.0x01.0x57.0x00
PCAP IC ILI2130 or equivalent
PCAP Interface I2C
PCAP Resolution 16384*16384
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

Electrical Characteristics

Electrical Characteristics

1. Operating conditions:

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VCC – 3.2 3.3 3.4 V
AVDD   4.5 5.0 5.5 V
Supply PCAP VDDT – 3.1 3.3 3.5 V
ICTP – – 56 84 mA
Input High Volt. VIH – 0.7 VCC － VCC V
Input Low Volt. VIL – 0 － 0.3 VCC V
LCD Driving Supply Voltage VGH *1 Ta=25℃ 15 16 17 V*3
VGL*2 -6 -5 -4
VcomH – 4.5 –
VcomL – -0.5 –
Supply Current For LCM IVCC VCC=3.3V – 30 45 mA

2. LED driving conditions

Parameter Symbol Min Typ Max Unit
LED current – – 140 – mA
Power Consumption – 1204 – 1470 mW
LED voltage VBL+ 8.6 9.5 10.5 V
LED Life Time – – 50,000 – Hr

Related products

Recently viewed products

5.7″ PCAP Touch Panel TFT LCD Module

Add to cart