4.3inch High Brightness 800×480 IPS TFT LCD Display with PCAP

Model No. WF43XSWAGDNG0

  • Size : 4.3 inch
  • Resolution : 800 x 480 dots
  • View Direction : 80/80/80/80(IPS)
  • Interface : RGB
  • Driver IC : HX8264+HX8664
  • Control-Board : No
  • Brightness (cd/m²): 900
  • Frame Through Hole: No
  • Touch Panel : Projected Capacitive Touch Panel, PCAP
  • Detect Point : 5 Fingers
Categories: ,

Description

WF43XSWAGDNG0 is a 4.3-inch IPS TFT-LCD module with a PCAP touchscreen. It features a resolution of 800×480 dots and a high brightness of 900 nits (typical value). The module dimension is 105.5(W) × 67.2(H) mm with an active area of 95.04 × 53.856 mm and a 16:9 aspect ratio. This module is built-in with HX8264+HX8664 driver IC which supports 24-bit RGB interfaces.

The module has a projected capacitive touch panel (PCAP) with 5-finger detection. Plus, it adopts an IPS panel for broader view angles of Left:80 / Right:80 / Up:80 / Down:80 degrees (typical value). WF43XSWAGDNG0 can operate at temperatures from -30℃ to +80℃, and its storage temperatures also range from -30℃ to +80℃.

Drawing

Drawing

Specifications

Specifications

Interface

1.LCM PIN Definition

Pin Symbol Function
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power voltage
5 R0 Red data
6 R1 Red data
7 R2 Red data
8 R3 Red data
9 R4 Red data
10 R5 Red data
11 R6 Red data
12 R7 Red data
13 G0 Green data
14 G1 Green data
15 G2 Green data
16 G3 Green data
17 G4 Green data
18 G5 Green data
19 G6 Green data
20 G7 Green data
21 B0 Blue data
22 B1 Blue data
23 B2 Blue data
24 B3 Blue data
25 B4 Blue data
26 B5 Blue data
27 B6 Blue data
28 B7 Blue data
29 GND Power ground
30 CLK Pixel clock input pin
31 DISP DISP sets the display mode.

DISP Function Description
L Standby mode
H Normal display mode
32 HSYNC Horizontal Sync Input. Negative polarity
33 VSYNC Vertical Sync Input. Negative polarity.
34 NC No connection
35 NC No connection
36 GND Power ground
37 NC No connection
38 NC No connection
39 NC No connection
40 NC No connection

 

2.PCAP PIN Definition

Pin Symbol Function
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.3V
3 SCL I2C clock input
4 NC No connection
5 SDA I2C data input and output
6 NC No connection
7 /RST External Reset, Low is active
8 NC No connection
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

General Specifications

General Specifications

Item Dimension Unit
Size 4.3 inch
Dot Matrix 800 × RGB × 480 (TFT) dots
Module dimension 105.5(W) × 67.2(H) × 5.44(D) mm
Active area 95.04 × 53.856 mm
Dot pitch 0.1188 × 0.1122 mm
LCD type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Driver IC HX8264+HX8664 or Equivalent
TFT Interface 24-bit RGB
Aspect Ratio 16:9
PCAP IC ILI2130 or Equivalent
PCAP Interface I2C
PCAP FW Version 0x07.0x00.0x00.0x00.0x01.0x0C.0x11.0x43
PCAP Resolution 16384*16384
Backlight Type LED, Normally White
Touch Screen Projected Capacitive Touch Panel, PCAP
Surface Glare

Absolute Maximum Ratings

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 － +80 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

Electrical Characteristics

1.Operating conditions：

Item Symbol Min Typ Max Unit
Supply Voltage For LCM VCC 3.0 3.3 3.6 V
Supply Current For LCM ICC – 60 90 mA
Supply CTP VDDT 3.1 3.3 3.5 V
ICTP – 52 78 mA

 

2.LED driving conditions：

Parameter Symbol Min Typ Max Unit
LED current – – 60 – mA
LED voltage VLED+ 21.6 24.0 26.0 V
LED Life Time – – 50,000 – Hr

 

Related products

4.3inch High Brightness 800×480 IPS TFT LCD Display with PCAP

Add to cart