2.8-Inch Grayscale COF OLED Display with 256×64 Resolution, Touch Panel, PCB, and Frame Support

Model No. WEN025664A-CTP

Graphic OLED Display
2.8″ OLED
Structure: COF + Frame + PCB
256×64 Dot Matrix
IC：SSD1322
3V power supply
1/64 duty cycle
Interface: 6800, 8080, SPI
With Capacitive Touch Screen (CTP)
Detect Point : 1 Finger
Display Color: White / Yellow
Support Grayscale

Categories: OLED Module, OLED Touch Display

Description

The WEN025664A-CTP series is a 2.8-inch monochrome graphic COF OLED display featuring a capacitive touch panel with a resolution of 256×64 dots. It is equipped with the SSD1322 IC and supports multiple interfaces, including 6800/8080 8-bit and 3/4-wire SPI interfaces. The module dimensions of the WEN025664A-CTP are 85.0 × 39.8 mm, and the active area is 69.1 × 17.26 mm. The model incorporates a projected capacitive touch panel (PCAP) with the FT6336U IC, supporting I2C interfaces and 1-point touch.

The WEN025664A-CTP OLED series operates on a 3V power supply with a driving method of 1/64 duty. It supports grayscales and boasts a high contrast ratio of 10,000:1. The module is capable of functioning in temperatures ranging from -20°C to +70°C, with a storage temperature range of -30°C to +80°C.

Featuring a metal frame with a PCB board and four screw holes, the WEN025664A-CTP facilitates easy installation for customers. The OLED series, equipped with a PCB board, can effortlessly connect with applications using wires, eliminating the need for customers to develop additional PCB boards. The integration of interface settings and VDD circuits enhances user-friendliness. Additionally, the four screw holes on the PCB simplify the installation process onto the application product.

The WEN025664A-CTP series also offers an option with the same OLED panel but without a touch panel. Please choose the WEN025664A series for the non-touch panel option.

Drawing

2.8 inch 256x64 OLED Display with Touch Panel Support Grayscale - WEN025664A-CTP

Data source ref: WEN025664AWPP3D00000

SPECIFICATIONS

Interface Pin Function

Pin Number

Symbol

I/O

Function

VSS

Ground.

VDD

Power Supply for Core Logic Circuit
Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS

N.C.

Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.

D/C#

Data/Command Control
This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.

R/W#
(WR#)

Read/Write Select or Write
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.

E/RD#

Read/Write Enable or Read
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.

7~14

DB0

I/O

Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.

DB1

DB2

DB3

DB4

DB5

DB6

DB7

Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.

RES#

This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.

CS#

Data/Command Control
This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.

Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.

BS1

Communicating Protocol Select
These pins are MCU interface selection input. See the following table:

BS[1:0]	Interface
00	4 line SPI
01	3 line SPI
10	8-bit 8080 parallel
11	8-bit 6800 parallel

Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD

BS0

TP_SCK

I2C clock input

TP_SDA

I2C data input and output

TP_INT

External interrupt to the host

TP_RST

External Reset, Low is active

General Specification

Item	Dimension	Unit
Dot Matrix	256 × 64 Dots	－
Module dimension	85.0 × 39.8 ×7.83	mm
Active Area	69.1 × 17.26	mm
Pixel Size	0.248×0.248	mm
Pixel Pitch	0.27×0.27	mm
Display Mode	Passive Matrix
Display Color	Monochrome
Drive Duty	1/64 Duty
OLED IC	SSD1322 (COF)
OLED Interface	6800, 8080, SPI
Size	2.8 inch
CTP IC	FT6336U
Detect Point	1
CTP Interface	I2C
Surface	Normal Glare

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Display	VDD	-0.3	4	V
Operating Temperature	TOP	-20	+70	°C
Storage Temperature	TSTG	-30	+80	°C

Electronical Characteristics

DC Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD	－	2.8	3.0	3.3	V
High Level Input	VIH	－	0.8×VDD	－	VDD	V
Low Level Input	VIL	－	0	－	0.2×VDD	V
High Level Output	VOH	－	0.9×VDD	－	VDD	V
Low Level Output	VOL	－	0	－	0.1×VDD	V
50% Check Board operating Current	IDD	VDD =3V	－	125	250	mA

Search keyword: 256×64 oled, oled 256×64, 2.8 oled, 2.8″ oled, 2.8 inch oled, oled 2.8, oled 2.8″