4.3 inch IPS 480×272 RTP with Controller Board, Frame

Model No. WF43WTYBEDAT0

Size : 4.3 inch
Resolution : 480×272 dots
View Direction : IPS
Interface : MCU
Controller IC：SSD1963
Control-Board : YES
Brightness (cd/m²): 350
Frame Through Hole: YES
Touch Screen : Resistive Touch Screen

Categories: TFT LCD, TFT Panel + Controller Board

Description

WF43WTYBEDAT0 is a 4.3 inch Resistive Touch TFT Display with Controller Board. The module has 480×272 pixels resolution and 350 cd/m2 brightness. It uses an IPS screen to offer wider viewing angles. WF43WTYBEDAT0 is equipped with an SSD1963 controller IC, supporting 8080 MCU 8bit interface. The module dimension is 106.7x 83.98 mm, and its active area is 95.04 x 53.86 mm. The supply voltage for analog ranges from 3.0V to 3.6V; the typical value is 3.3V.

The WF43WTYBEDAT0 module can operate at temperatures from -20°C to +70°C; its storage temperatures range from -30°C to +80°C.

Drawing

SPECIFICATIONS

Interface

LCM PIN Definition

Pin	Symbol	Function
1	GND	System round pin of the IC. Connect to system ground.
2	VDD	Power Supply
3	BL_E	Backlight control signal , H: On L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7	DB0	Data bus
8	DB1	Data bus
9	DB2	Data bus
10	DB3	Data bus
11	DB4	Data bus
12	DB5	Data bus
13	DB6	Data bus
14	DB7	Data bus
15	CS	Chip select
16	RESET	Hardware reset
17	NC	No connection
18	XR	Right electrode
19	DISP_ON	Display control H: On L:Off
20	YD	Bottom electrode
21	XL	Left electrode
22	YU	Top electrode

General Specifications

Item	Dimension	Unit
Size	4.3	inch
Dot Matrix	480 × RGB × 272(TFT)	dots
Module dimension	106.7x 83.98 x 9.2	mm
Active Area (AA)	95.04 x 53.86	mm
Dot pitch	0.066 × 0.198	mm
LCD type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Controller IC	SSD1963
Interface	Digital 8080 family MPU 8bit/16bit
Touch Screen	Resistive Touch Panel (RTP)
Surface	Anti-Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Operating conditions

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	3.0	3.3	3.6	V
Supply Current For LCM	IDD	–	270	405	mA

LED driving conditions

Parameter	Symbol	Min	Typ	Max	Unit
LED current	–	–	20	–	mA
Power Consumption	–	540	640	680	mW
LED voltage	VLED+	27	32	34	V
LED Life Time	–	–	50,000	–	Hr