The WF35QTIBCDBT0 is a 3.5-inch resistive touch screen TFT LCD display module with a control board. It has a resolution of 320×240 pixels and an aspect ratio of 4:3. This TFT module includes an SSD1963 controller board and is available in 8080 family MPU 8-bit or 16-bit interface options. Pin numbers 33 to 36 are pre-defined as the backlight supply, so there is no need to design an extra backlight circuit. The module includes frame through holes for easy mounting and usage.
The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:
- The Q Series integrates a 36-pin connector on the SSD1963 controller board, and all connectors are oriented in the same direction.
- The Q Series modules are available in 8080 family MPU 8-bit and 16-bit parallel interface options.
- Pins 33 to 36 are already pre-defined as the backlight supply.
- With a built-in backlight driver IC, Q series TFT displays can be driven by 5V (the 3.5″ and 4.3″ also support 3.3V). Customers do not have to change the backlight driver circuits when changing the TFT module sizes.
- The 5.7”, 7.0”, 8.0”, and 10.2” Q Series allow for the design of a “Sleep Mode” to close BIAS (VGH, VGL, AVDD) for low power consumption.
- Resistive touch screen options are available for all Q Series displays, and a 4-line signal (X1, Y1, X2, Y2) can be input from the 36-pin connector.
- Capacitive touch screen options are available for all Q Series displays, and the I2C read/write protocol can be input from the 36-pin connector.
The WF35QTIBCDBT0 resistive touch screen TFT module operates in temperatures ranging from -20℃ to +70℃, and its storage temperature ranges from -30℃ to +80℃. The LCM power supply voltage is 3.0V to 3.3V, with a typical value of 3.1V. The module has a brightness of 300 nits and a contrast ratio of 350:1 (typical value).
