High Brightness 10.1 inch LVDS IPS TFT Display 1024×600 with PCAP

Model No. WF101JSYAHLNB0

Size : TFT IPS 10.1 inch
Resolution : 1024×600 dots
View Direction : IPS
Interface : LVDS
Driver IC : EK79001HN + EK73215BCGA
Control-Board : No
Brightness(cd/m2) : 900
Frame Through Hole : No
Touch Screen : Projected Capacitive Touch Panel (PCAP)
Detect Point : 5 Fingers

Description

WF101JSYAHLNB0 is a high brightness 10.1 inch IPS TFT LCD display module with Projected Capacitive Touch Panel (PCAP); made of resolution 1024×600 pixels. WF101JSYAHLNB0 model is built in with EK79001HN and EK73215BCGA driver ICs; it supports LVDS interface, contrast ratio 800:1 (typical value), brightness 900 nits (typical value), aspect ratio 16:9, glare surface glass, normally black, transmissive LCD type. This 10.1″ IPS TFT display has a wider viewing angle than TN TFT, it’s view angle is Left:85 / Right:85 / Up:85 / Down:85 degree (typical value). This Capacitive Touch Panel is equipped with ILI2511 IC on module, which supports USB interface, also available for I2C interface, multi-touch function, and compatible with Windows, Linux, Android and Mac Operating System. More details for USB/I2C interface Capacitive Touch Screen with ILI2511 IC; please check Winstar website at technical article.

The power supply voltage (VDD) of WF101JSYAHLNB0 is from 3.0V to 3.6V, typical value 3.3V. It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃. If customers require Resistive Touch Panel, please consider WF101JSYAHLNT0 model.

Drawing

Affichage IPS 10,1 pouces TFT, Écran IPS 10,1 - WINSTAR

Specifications

Interface

TFT LCD Module

Pin No.	Symbol	Description
1	VCOM	Common voltage
2	VDD	Digital power
3	VDD	Digital power
4	NC	Not connect
5	Reset	Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ，C=1μF)
6	STBYB	Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7	GND	Digital ground
8	RXIN0-	Negative LVDS differential data inputs
9	RXIN0+	Positive LVDS differential data inputs
10	GND	Digital ground
11	RXIN1-	Negative LVDS differential data inputs
12	RXIN1+	Positive LVDS differential data inputs
13	GND	Digital ground
14	RXIN2-	Negative LVDS differential data inputs
15	RXIN2+	Positive LVDS differential data inputs
16	GND	Digital ground
17	RXCLKN-	Negative LVDS differential clock inputs
18	RXCLKN+	Positive LVDS differential clock inputs
19	GND	Digital ground
20	RXIN3-	Negative LVDS differential data inputs
21	RXIN3+	Positive LVDS differential data inputs
22	GND	Digital ground
23	NC	Not connect
24	NC	Not connect
25	GND	Digital ground
26	NC	Not connect
27	NC	Not connect
28	SELB	6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit
29	AVDD	Analog power
30	GND	Digital ground
31	LED-	LED Cathode
32	LED-	LED Cathode
33	L/R	Left or right display control
34	U/D	Up / down display control
35	VGL	Negative power for TFT
36	NC	Not connect
37	NC	Not connect
38	VGH	Positive power for TFT
39	LED+	LED Anode
40	LED+	LED Anode

When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

PCAP PIN Definition

Pin	Symbol	Function
1	USB_VSS	System ground
2	USB_VDD 5V	Power supply
3	USB_D+	Data +
4	USB_D-	Data –
5	VSS	System ground
6	SDA	I2C data input and output
7	SCL	I2C clock input
8	RST	External Reset, Low is active
9	INT	External interrupt to the host
10	VDDT 3.3	Power supply

General Specifications

Item	Dimension	Unit
Size	10.1	inch
Dot Matrix	1024 RGB x 600	dots
Module dimension	235(W) x 143(H) x 8.78(D)	mm
Active area	222.72 (H) x 125.28(V)	mm
Pixel pitch	0.2175(W) x 0.2088(H)	mm
LCD type	TFT, Normally Black, Transmissive
Interface	LVDS
Driver IC	EK79001HN + EK73215BCGA or equivalent
Viewing Angle	85/85/85/85
Aspect Ratio	16:9
Backlight Type	LED, Normally White
PCAP IC	ILI2511 or equivalent
PCAP Interface	USB (I2C available)
PCAP FW Version:	V6.0.0.0.62.90.1.2
Touch Panel	With PCAP
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Typical Operation Conditions (At Ta = 25 °C,)

Item	Symbol	Min	Typ	Max	Unit
Digital Power Supply Voltage For LCD	VDD	3	3.3	3.6	V
Analog Power Supply Voltage	AVDD	9.89	10.2	10.5	V
Gate On Power Supply Voltage	VGH	19.4	20.0	20.6	V
Gate Off Power Supply Voltage	VGL	-10.3	-10.0	-9.7	V
Common Power Supply Voltage	VCOM	4.0	4.3	4.6	V
Input logic high voltage	VIH	0.7 VDD	–	VDD	V
Input logic low voltage	VIL	0	–	0.3 VDD	V
Supply PCAP	USB_VDD 5V	4.4	5.0	5.5	V
Supply PCAP	I VDD 5V	—	97.8	120	mA

Search keyword: tft 10.1″, 10.1 tft lcd, 10.1″ tft lcd, 10.1 inch tft lcd, tft lcd 10.1, 10.1 tft display, 10.1″ tft display, 10.1 inch tft display, tft display 10.1″, 10.1 tft lcd