This 8-inch TFT LCD display module of WF80QTIFGDBNB is with outline dimension of 192.8.0 x 116.9 mm and active area size of 176.64 x 99.36 mm. It has a resolution of 800×480 pixels, an aspect ratio of 16:9, a brightness of 420 nits (typical value), and a contrast ratio of 500:1.
This module features a control board and a built-in SSD1963 controller IC with MCU interface support. Its 33~36 pins are uniformly defined as the backlight power input, so customers do not need to design additional backlight circuits. It’s supply voltage range from for LCM is 3.0V to 3.3V (typical 3.1V). Operating temperature ranges from -20℃ to +70℃, and the storage temperature are from -30℃ to +80℃.
The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:
- The Q Series integrates a 36-pin connector on the SSD1963 controller board, and all connectors are oriented in the same direction.
- The Q Series modules are available in 8080 family MPU 8-bit and 16-bit parallel interface options.
- Pins 33 to 36 are already pre-defined as the backlight supply.
- With a built-in backlight driver IC, Q series TFT displays can be driven by 5V (the 3.5″ and 4.3″ also support 3.3V). Customers do not have to change the backlight driver circuits when changing the TFT module sizes.
- The 5.7”, 7.0”, 8.0”, and 10.2” Q Series allow for the design of a “Sleep Mode” to close BIAS (VGH, VGL, AVDD) for low power consumption.
- Resistive touch screen options are available for all Q Series displays, and a 4-line signal (X1, Y1, X2, Y2) can be input from the 36-pin connector.
- Capacitive touch screen options are available for all Q Series displays, and the I2C read/write protocol can be input from the 36-pin connector.
