5.2 inch 480×128 Bar Type TFT LCD

Model No. WF52CTLBSDBN0

Size : 5.2 inch
Resolution : 480 x 128 dots
View Direction : 6H
Interface : 8080, MPU
Controller IC：MR6566
Control-Board : Yes
Brightness (cd/m²): 500
Frame Through Hole : No
Touch Panel : Without Touch Panel
O-Film : No

Categories: TFT LCD, TFT Panel + Controller Board

Description

WF52CTLBSDBN0 is a 5.2 inch Bar type TFT LCD featuring a controller board with screw holes on the PCB. The module has a resolution of 480×128 pixels and a brightness of 500 nits (typical value). WF52CTLBSDBN0 uses MR6566 driver IC supporting MCU 8080 8-bit interfaces. Its supply voltage for logic is 4.5V-5.5V with a typical value of 5V.

Customers using 240X64 (dots) STN with RA6963 controller IC can replace it with this new WF52CTLBSDBN0 module without changing the interfaces and firmware, easily upgrading your single-colored display to color TFT.

WF52CTLBSDBN0 can operate at temperatures from -20 to +70℃, and its storage temperatures cover from -30℃ to +80℃.

Drawing

SPECIFICATIONS

Interface

LCM PIN Definition (CON4)

Pin	Symbol	Function
1	GND	Ground
2	NC	No connect
3	NC	No connect
4	D/C	Data/Command select
5	WR	Write control
6	RD	Read control
7	DB0	Data bus
8	DB1	Data bus
9	DB2	Data bus
10	DB3	Data bus
11	DB4	Data bus
12	DB5	Data bus
13	DB6	Data bus
14	DB7	Data bus
15~24	NC	No Connect
25	CS	Chip Select
26	RESET	Reset
27	LR	Right /Left selection; Default R/L is Pull High
28	UD	Up/down selection; Default U/D is Pull High
29~32	NC	No connection
33~34	GND	Ground
35~36	VDD5V	Power Supply (+5V)

LCM PIN Definition (CON1)
(MCU8080 the same with the WG24064A for RA6963 serial)

Pin	Symbol	Function
1	FG	System round pin of the IC. Connect to system ground
2	GND	Ground
3	VDD5V	Power Supply (+5V)
4	NC	No connect
5	WR	Write control
6	RD	Read control
7	CS	Chip select
8	D/C	Data/Command select
9	NC	No connection
10	RESET	Reset
11	DB0	Data bus
12	DB1	Data bus
13	DB2	Data bus
14	DB3	Data bus
15	DB4	Data bus
16	DB5	Data bus
17	DB6	Data bus
18	DB7	Data bus
19~20	NC	No connection
21	VDD5V	Power Supply (+5V)
22	GND	Ground.
23~25	NC	No connection
26	GND	Ground

USB

Pin	Symbol	Function
1	5V	Power 5V
2	D-	Data line –
3	D+	Data line +
4	NC	No connection
5	GND	Power Ground

General Specifications

Item	Dimension	Unit
Size	5.2	inch
Dot Matrix	480 × RGB × 128	dots
Module dimension	180.0 x 65.0 x 11.1	mm
Active area(AA)	127.152 × 33.9072	mm
Dot pitch	0.0883 × 0.2649	mm
LCD type	TFT, Normally White, Transmissive
View Direction	6 o’clock
Gray Scale Inversion Direction	12 o’clock
Aspect Ratio	Bar Type
Backlight Type	LED, Normally White
Controller IC	MR6566
Interface	Digital 8080 family MPU 8bit/16bit
Touch Panel	Without touch panel
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	4.5	5.0	5.5	V
Supply Current For LCM	IDD	－	500	750	mA
LED Life Time		－	50,000	－	Hr