4″ 480×480 IPS Square TFT LCD Display / Panel with PCAP (High Brightness, Wide Temperature)

Model No. WF40ESWAA6DNG0

Square LCD Display
Size: 4 inch
Resolution : 480×480 dots
View Direction : IPS
Interface : RGB
Driver IC : ST7701S
Control-Board : No
Brightness(cd/m²) : 1000
Frame Through Hole : No
Touch Screen : Projected Capacitive Touch Panel (PCAP)
Detect Point : 5 Fingers
Operating Temperature : -30~+80°C (Wide Temperature)

Categories: High Brightness TFT Display, TFT LCD

Description

WF40ESWAA6DNG0 is a high brightness 4 inch Square IPS TFT LCD display module with projected capacitive touch panel (PCAP); made of resolution 480 x 480 pixels. This module supports 24-bit RGB interface, it featured with IPS panel which is having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), high brightness 800 nits (typical value), anti-glare surface panel, aspect Ratio 1:1.

WF40ESWAA6DNG0 Square TFT LCD display module is integrated driver IC ST7701S on module, the interface supply voltage range from 2.5V to 3.6V, typical value 2.8V. WF40E model can be operated at temperatures from -30℃ to +80℃; its storage temperatures range from -30℃ to +80℃.

Drawing

Interface

LCM PIN Definition

Pin	Symbol	Function
1	VLED-	Power for LED backlight cathode
2	VLED+	Power for LED backlight anode
3	GND	Power ground
4	VCC	Power supply
5	R0	Data bus
6	R1
7	R2
8	R3
9	R4
10	R5
11	R6
12	R7
13	G0	Data bus
14	G1
15	G2
16	G3
17	G4
18	G5
19	G6
20	G7
21	B0	Data bus
22	B1
23	B2
24	B3
25	B4
26	B5
27	B6
28	B7
29	SCL	SCL: Serial clock input for SPI interface.
30	PCLK	Dot clock signal for RGB interface operation
31	CS	– A chip select signal Low: the chip is selected and accessible High: the chip is not selected and not accessible
32	HSYNC	Line synchronizing signal for RGB interface operation
33	VSYNC	Frame synchronizing signal for RGB interface operation
34	DE	Data enable signal for RGB interface operation Low: access enabled High: access inhibited
35	SDA	SDA: Serial data input/output bidirectional pin for SPI Interface.
36	RESET	– The external reset input – Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40	NC	No connect

PCAP PIN Definition

Pin	Symbol	Function
1	VSS	Ground for analog circuit
2	VDDT	Power Supply : +3.0V
3	SCL	I2C clock input
4	NC	No connect
5	SDA	I2C data input and output
6	NC	No connect
7	/RST	External Reset, Low is active
8	NC	No connect
9	/INT	External interrupt to the host
10	VSS	Ground for analog circuit

General Specifications

Item	Dimension	Unit
Size	4.0	inch
Dot Matrix	480 × 3(RGB) × 480	dots
Module dimension	78.8(H) × 82.95 (W) × 7.17	mm
Active area	71.856(H) × 70.176 (V)	mm
Dot pitch	0.1497(H) × 0.1462(V)	mm
LCD type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	1:1
Interface	24-bit RGB
Driver IC	ST7701S or Equivalent
Backlight Type	LED, Normally White
PCAP IC	ST1633I or equivalent
PCAP Interface	I2C
PCAP FW Version:	V01
Touch Panel	capacitive touch panel (PCAP)
Surface	Anti-Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-30	－	+80	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Typical Operation Conditions

Item	Symbol	Values			Unit
Item	Symbol	Min.	Typ.	Max.	Unit
Interface Supply Voltage	VCC	2.5	2.8	3.6	V
Current for Driver(White)	IVCC	–	27	40.5	mA
Supply PCAP	VDDT	2.8	–	3.3	V
Supply PCAP	ICTP(mA)	–	12.4	18.6	mA

Search keyword: tft 4″, 4 tft lcd, 4″ tft lcd, 4 inch tft lcd, tft lcd 4, 4 tft display, 4″ tft display, 4 inch tft display, tft display 4″