5.2 inch Bar Type TFT LCD

Model No. WF52QSZBSDBN0

Size : 5.2”
Size : 5.2”
Resolution : 480 x 128 dots
View Direction : 6H
Interface : 8080, MPU
Controller IC : SSD1963
Control-Board : Yes
Brightness (cd/m²): 850
Frame Through Hole : Yes
Touch Screen : Without touch screen
O-Film : Yes

Description

WF52QSZBSDBN0 is a 5.2-inch bar-type TFT LCD with O-film wide viewing angles. The module is built-in with SSD1963 driver IC, supporting 8080 MPU interfaces. It has a resolution of 480×128 dots and a high brightness of 850 cd/m2. The module dimension is 180.0 × 65.0 × 8.8 mm with an active area of 127.152 × 33.9072 mm. The display features a glare surface, 6 o’clock view direction, and 12 o’clock gray scale inversion direction.

The display comes with four screw holes on its PCB board so that users can easily mount it with various applications. The supply voltage for LCM (VCC) is from 3.0V to 3.6V (typical value: 3.3V). This bar TFT can operate at a temperature range from -20℃ to +70℃, and its storage temperatures are from -30℃ to +80℃.

Drawing

Interface

LCM PIN Definition (CON4)

Pin	Symbol	Function
1	GND	System round pin of the IC. Connect to system ground.
2	VDD	Power Supply : +3.3V
3	BL_E	Backlight control signal , H: On L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7~14	DB0~DB7	Data bus
15~22	DB8~DB15	Data bus (When select 8bits mode, this pin is NC)
23~24	NC	No connect
25	CS	Chip select
26	RESET	Hardware reset
27	LR	Right /Left selection; Default R/L is Pull High
28	UD	Up/down selection; Default U/D is Pull High
29~32	NC	No connection
33~34	VLED-	VLED- for B/L LED inverter (GND)
35~36	VLED+	VLED+ for B/L LED inverter (+5V)

LCM PIN Definition (CON1)

Pin	Symbol	Function
1	NC(FG)	No connect (Frame Grand)
2	GND	System round pin of the IC. Connect to system ground.
3	VDD	Power Supply : +3.3V
4	BLE	Backlight control signal , H: On L: Off
5	WR	Write strobe signal
6	RD	Read strobe signal
7	CS	Chip select
8	D/C	Data/Command select
9	NC	No connect
10	RESET	Hardware reset
11~18	DB0~DB7	Data bus
19~20	NC	No connect
21	VLED+	VLED+ for B/L LED inverter (+5V)
22	VLED-	VLED- for B/L LED inverter (GND)
23~25	NC	No connect
26	GND	Hardware reset

General Specifications

Item	Dimension	Unit
Size	5.2	inch
Dot Matrix	480 × RGB × 128	dots
Module dimension	180.0 × 65.0 × 8.8	mm
Active area	127.152 × 33.9072	mm
Dot pitch	0.0883 × 0.2649	mm
LCD type	TFT, Normally White, Transmissive
View Direction	6 o’clock
Gray Scale Inversion Direction	12 o’clock
Aspect Ratio	Bar Type
Backlight Type	LED, Normally White
Controller IC	SSD1963
Interface	Digital 8080 family MPU 8bit/16bit
With /Without TP	Without touch panel (screen)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	－	3.0	3.1	3.3	V
Supply Current For LCM	IDD	－	－	200	－	mA

Search keyword: tft 5.2, tft 5.2″, 5.2 tft lcd, 5.2″ tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2″ tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2″,bar type tft